咨詢熱線:

0531-88771136

您的當前位置: 首頁 > 新聞中心 > 正文

雙色模具和普通模具加工有什么區別?

來源:http://www.junyhw.icu     發布時間:2020-06-10 16:44:43    點擊:

  雙色模具的定義兩種不同的塑膠資料在同一臺注塑機上注塑,分兩次成型,可是產品只出模一次的模具。一般這種模塑工藝也叫雙色模具注塑加工,一般由一套模具完結。
  The definition of two-color mold two kinds of different plastic materials are injected on the same injection molding machine, divided into two molding, but the product only comes out of the mold once. Generally this kind of molding process is also called two-color mold injection processing, which is generally completed by a set of molds.
  雙色模具對咱們來說,可能不太生疏,有時候咱們在使用一些電子產品或許儀器,你會發現它們的外殼有一個特點,外殼上的色彩不一樣,并且長時間也不會褪色,始終保持原來的樣子,外觀還是那樣艷麗,靚麗十足,并且操作起來手感很好還環保。
  The two-color mold may not be unfamiliar to us. Sometimes we are using some electronic products or instruments. You will find that their shell has a feature. The color on the shell is not the same, and it will not fade for a long time. It always keeps the original appearance. The appearance is still so gorgeous and beautiful, and it has a good handle and environmental protection.
            山東鋁合金壓鑄
  所以雙色模具與一般的塑膠模具的差異就在這兒,一般的塑膠模具只有一種色彩,而雙色模具有兩種色彩,是由兩種不同的質料通過雙色注塑成型而成,而一般的塑膠模具由一種質料注塑而成,雙色模具的外殼之所以兩種色彩新鮮而不褪色的原因。
  So the difference between the two-color mold and the general plastic mold is here. The general plastic mold has only one color, and the two-color mold has two colors, which are made of two different materials through two-color injection molding, while the general plastic mold is made of one material injection molding. The reason why the two colors of the shell of the two-color mold are fresh and do not fade.
  而一般的塑膠模具要想完結2種或許3種以上的色彩,那有必要通過噴涂二次加工工藝來完結,油漆并且簡單掉色,不環保,所以許多企業會挑選雙色模具加工來避免此問題,但前提是雙色模具要比一般的塑膠模具多一套模具,制模本錢上要高,假如該產品量大,試產品具有很強的競爭力和久遠的市場,不煩挑選雙色模具也未嘗不可,由于一般的塑膠模具產品通過噴涂二次加工工藝的本錢也是很高。
  The general plastic mold wants to finish two or more colors, it is necessary to finish it by spraying the secondary processing technology, paint and simple color fading, not environmental protection, so many enterprises will choose the two-color mold processing to avoid this problem, but the premise is that the two-color mold should have one more set of mold than the general plastic mold, and the cost of making the mold is higher. If the product is large, try The product has a strong competitiveness and a long market, so it\'s not difficult to choose two-color mold, because the cost of general plastic mold products through spray secondary processing technology is also very high.
  雙色模具現在市場上日益盛行,于這種工藝可以使產品的外觀愈加漂亮,易于換色彩而可以不用噴涂,但造價貴重,技能要求高。雙色模具是需要2套模具的,前模是不同的,兩個后模是相同的,并且導柱盡量是不能偏位的,設計中特別需要留意,雙色模具塑膠資料的挑選方面:半成品方面有必要挑選熔點高的資料,成品挑選熔點低的資料。
  The two-color mold is becoming more and more popular in the market. This process can make the appearance of the product more beautiful, and it is easy to change the color without spraying, but the cost is expensive and the technical requirements are high. Two sets of moulds are needed for the two-color moulds. The front moulds are different, the two back moulds are the same, and the guide post should not be deviated. In the design, special attention should be paid to the selection of plastic materials for the two-color moulds: for the semi-finished products, it is necessary to select materials with high melting point, and for the finished products, it is necessary to select materials with low melting point.
  以上是關于雙色模具和一般模具的差異,由濟南模具友情奉獻,想要了解更多歡迎咨詢http://www.junyhw.icu網站。
  The above is about the difference between two-color mold and general mold, contributed by Jinan mold friendship. If you want to know more, please contact us http://www.junyhw.icu Website.
聯系我們 contact

山東濟南模具_鋁合金壓鑄廠-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄廠-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

大足在家手工赚钱 意甲积分 分分彩真的有公式吗 河南快3开奖走势图 赛车pk10开奖软件 今晚开奖结果 四川血战麻将技巧 app彩票软件 单机游戏捕鱼达人 申城棋牌游戏? 青海快3推荐号明天